Page 1 of 1

914/915 diff and coarse spline output flanges $100

PostPosted: Wed May 24, 2017 7:17 pm
by Chris Hamilton
These are the flanges you need on the transmission side to do a CV joint upgrade. There are coarse spline and fine spline flanges.

Ring gear has some pitting so probably needs to be tossed.

$100
IMG_4043.jpg

IMG_4044.jpg

Re: 914/915 diff and coarse spline output flanges $100

PostPosted: Wed May 24, 2017 7:18 pm
by Chris Hamilton
It only allows me to upload two files at a time so here's the last one showing the spline on the flanges.

IMG_4047.jpg